Frequently Asked Questions: 0000 Superfine Steel Wool Collapse All What is 0000 Superfine Steel Wool and why is it special? "0000"-grade steel wool is super-fine, soft and flexible, excellent for smoothing, polishing, or buffing delicate finishes without scratching. It’s often used between finish coats or for light surface refinement. How should I use 0000 superfine steel wool in wood finishing? Use it dry or with light lubricant (mineral oil, wax, furniture oil and restorer oil). Gently rub with the grain to buff out brush marks, sheen irregularities, or to scuff up between coats for adhesion. Can "0000" superfine steel wool be used with shellac or lacquer finishes? Yes. After full cure, use 0000 wool to rub out scratches or smooth shellac. When rubbing shellac, always follow with a wax layer. For lacquer, use caution — only after proper drying and with light strokes. Is there a risk of wire residue or rust? Proper use minimises that risk. Always flush with wipe-proof oil or wax afterward to trap steel fibers and inhibit oxidation. Dispose of responsibly after use. Should I ever use steel wool with water? NO: Avoid using steel wool wet on wood — rusting can occur. Always use the steel wool dry or with finishing oils or wax. Are there safety precautions I should take? Yes — wear gloves to avoid wire splinters and use in a well-ventilated area to prevent dust inhalation. Dispose of used wool carefully (it could ignite if it's oily and compacted). Can 0000 steel wool be used to buff wax finishes? Yes — You can use it very lightly to remove haze or kiss the wax surface always go in the direction of the grain not in a circular motion, especially before final buffing with a cloth. ⚠️ Disclaimer: Always test in an inconspicuous area before using. Always test on a small, hidden section before first use. Results may vary depending on furniture age, finish, and type of timber. Aussie Furniture Care is not responsible for damage caused by incorrect use.
