SIL7000 – Acetoxy Silicone Sealant High performance sealant suitable for the sealing, bonding, repairing and mending required in glass and window construction, double glazing windows shower screens and sanitary ceramics. SuperSil 7000 exhibits an excellent adhession to glass tiles ceramics, fiberglass, aluminium, non-oily woods, painted surfaces, plastics and other porous surfaces. Properties Unit Value Cure Type Acetoxy Flow Sag / Slump mm <0 Extrusion Rate, ml/min 435 Working Time Min 10 Skin Over Time Min 10 Cure Time hr. 48 Elastic Recovery % 82 Movement Capability mm . -20 Service Temperature Range 0C 4 ~ 40 Hardness (Shore A) Shore A 25 Tensile Strength Mpa 0.2 Specific Gravity g/cm3 0.99 Direction for Use Ensure all surfaces are clean, dry and grease free. Remove all grit oil, grease detergents flaking paint, oil sealant and any loose materials. Cut tip of nozzle and cartridge. Screw nozzle onto cartridge. Fit into caulking gun, apply on surface in steady flow. If required smoothen, shape sealant with a spatula dipped in a mild detergent. Remove excess uncured sealant with a mineral turpentine soaked cloth fully cured excess sealant can be removed by trimming it with sharp knife. Application Tips To obtain a smooth and neat finish apply masking tape and remove before sealant cures. Paint surface completely before applying any sealant. Warning Ensure good ventilation if used indoors. Contact of unvulcanised silicone sealant with eyes and mucous members must be avoided as this cause irritation. If Prolonged Contact occurs with eyes flush with water and consult physician if necessary Keep out of reach of children. Storage Store in a dry and cool place below 30ºC ( 90ºF)
